/ Perfect Charging / Perfect Welding / Solar Energy42,0426,0093,EN 018-29122014Acctiva Professional 35 AAcctiva Professional 35 A UCNOperating Instruc
8Safety measures in normal opera-tionEMC Device Clas-sificationsEMC measuresData protection- Chargers with a ground conductor must only be operated on
9ENMaintenance and repairWarranty and lia-bilitySafety inspectionSafety symbolsUnder normal operating conditions, the device requires only a minimum o
10DisposalCopyrightDevices displaying this TÜV test mark satisfy the requirements of the relevant standards in Japan.Devices displaying this TÜV test
11ENSafety rules - required for USA, Canada and Austral-iaGeneral and elec-trical risksKEEP THESE INSTRUCTIONS CAREFULLY - This guide contains importa
12If skin or clothing comes into contact with battery acid, wash the acid immediately with soap and water. If acid gets into the eye, rinse the eye im
13ENSteps to follow with battery in-stalled in vehicleFollow these steps if the battery is installed in the vehicle. A spark near to the battery can c
14This device is designed for more than 15 amperes and must be operated on a circuit with a nominal voltage of 120 volts. The device is equipped in th
15ENGeneral informationPrinciple The main feature of the new Active Inverter Technology is intelligent charging. This means that the charging behaviou
16Start-upSafetyProper use The charger is designed to charge the batteries listed below. Any other use or use beyond this purpose is deemed improper.
17ENControl elements and connectionsGeneral remarksControl panelNo. Function(1) Graphic display(2) Menu key- Select the desired setting, e.g. Ah(3) Up
0
18ConnectionsNo. Function(1) Mains cable safety clip(2) AC input - mains socket(3) Connection P2 - I/O port - no function, can be retrofitted howeverf
19ENRemoving covers for connections and optionsIf necessary, use a screwdriver to remove:- Cover (1) for connection P3 - visual port- Cover (2) for co
20Wall bracket op-tionPreparations for security lockThe security lock is not contained in the scope of supply.A security lock can only be attached - t
21ENSpace requirements with edge guardSpace requirements without edge guard, and space requirements with signal lamp and bracket options (* space for
22Operating modesGeneral informa-tionThe charger is suitable for all 6/12/24 V lead acid batteries (wet, MF, AGM and GEL).Available operat-ing modesTh
23ENRefresh modeRefresh mode reactivates deeply dischar-ged or sulphated batteries. Refresh char-ging of batteries must be carried out either in the o
24Charging modeGeneral informa-tionCharging mode is used for:- Charging or conservation charging with the battery either fitted or removed- Charging w
25ENIf the battery voltage selection window does not open, then the battery is in a state of ex-treme deep-discharge (less than 2 V). In this case, it
26Restarting charg-ingPress the Stop/Start button to continue charging1
27ENBuffering (Trickle) modeGeneral informa-tionBuffering (Trickle) mode is intended exclusively for relieving the battery during a vehicle diagnosis
1ENDear reader,Introduction Thank you for the trust you have placed in our company and congratulations on buying this high-quality Fronius product. Th
28Disconnect the charger- Disconnect the black charger lead from the negative pole (-) on the battery- Disconnect the red charger lead from the positi
29ENRefresh modeGeneral informa-tionRefresh mode is used to charge the battery if it is suspected that the battery has been in a state of deep-dischar
30Connect battery - the de-energised charger leads mean there are no sparks when connecting to the battery, even if the charger is already connected t
31ENDuring the analysis phase, the charger mo-nitors the battery voltage and the result is used in the subsequent charging process.- A set of four bar
32Battery changing modeGeneral informa-tionBattery changing mode supplies the vehicle electronics with power while the battery is re-placed. Before di
33ENIf the battery is in a state of extreme deep-discharge (under 2 V), a warning appears in-structing the user to disconnect the battery.Batteries in
34Power supply modeRequirements In Power supply mode, the charger leads are connected directly to the battery leads or the vehicle jump start points.
35ENDevice optionsGeneral informa-tionThe device options allow the following to be configured:- LanguageSelection of language for user guide- Graphic
36- Boost (on/off), factory setting: onBoost on: shorter charging time resulting in the battery being fully charged sooner. The full 35 A of power ava
37ENSynergic linesSafetyAvailable charac-teristicsCharging characteristic IUoU:I1 = Main charging current U1 = Final charging voltage U2 = Conservatio
38Refresh characteristic IUIoU:I1 = Main charging current U1 = Final charging voltage I2 = Recharging current U2 = Conservation charging voltageI1U1U2
39ENTroubleshootingSafetyProtective equip-mentCharger leads connected to wrong poles, reverse polarity protection has trippedRemedy:- Connect battery
40Charging errorsNo. 30: Timeout in the corresponding char-ging phaseRemedy:- Set Ah to correct value- Check for parallel consumers (car ra-dio, etc.)
41ENNo. 50: Device output fuse defectiveRemedy:- Contact After-Sales ServiceNo. 51: Secondary temperature out of rangeRemedy:- Contact After-Sales Ser
42Technical dataElectrical data in-put 230VStandards 230VElectrical data in-put 120 VStandards 120VMains voltage ~ 230 V AC, +/- 15 %Mains frequency
43ENElectrical data outputBattery dataTechnical dataEnvironmental conditionsIEC 60068-2-6 Sinusoidal vibration (sine 10-55 Hz; 20 cycles / axis; accel
45
Fronius Worldwide - www.fronius.com/addressesUnder http://www.fronius.com/addresses you will find all addresses of our sales branches and partner firm
3ENContentsSafety rules ...
4Power Supply mode... 23Dev
5ENSafety rulesExplanation of safety symbolsIf you see any of the symbols depicted in the "Safety rules" chapter, special care is re-quired.
6Proper useEnvironmental conditionsMains connectionDangers from mains current and charging cur-rentThe device is to be used exclusively for its intend
7ENDangers from ac-id, gases and va-poursGeneral informa-tion regarding the handling of bat-teriesProtecting your-self and othersBatteries contain aci
Kommentare zu diesen Handbüchern